© 2026 Nanjing Finechem Holdings Co., Ltd,
All Right Reserved
Chemical Name: Triphenylmethanol
Synonyms: Triphenylcarbinol
Chemical Formula: C19H16O
Appearance: White or slightly off-white crystalline solid
Odor: Faint aromatic scent
Common Uses: Laboratory research, organic synthesis, teaching chemical reactions in academic settings
Hazard Classification: Not classified as highly hazardous, but some irritation risk
Main Health Hazards: May cause skin and eye irritation on contact
Environmental Concerns: Not known to be highly toxic to aquatic life; minimal volatility
Target Organs: Eyes, skin, possibly respiratory tract in case of dust generation
Label Elements: Irritant pictogram applies during handling and processing
Main Component: Triphenylmethanol—typically above 99% purity for lab uses
Impurities: Traces of organic byproducts depending on synthesis route
Formula Weight: 260.33 g/mol
Inhalation: Move to fresh air; seek medical attention if discomfort persists
Skin Contact: Wash affected area thoroughly with soap and water
Eye Contact: Rinse cautiously with water for several minutes; removal of contact lenses if easy
Ingestion: Rinse mouth with water; do not induce vomiting; consult medical professionals in case of accidental consumption
Symptoms to Watch For: Redness, irritation, or mild coughing from dust
Suitable Extinguishing Media: Dry chemical, CO2, foam, or water spray
Fire Hazards: Combustible at high temperatures; may release irritating fumes
Protective Gear: Full fire-fighting gear and self-contained breathing apparatus advised in confined spaces
Combustion Products: Carbon oxides, possibly low-molecular-weight aromatics
Personal Precautions: Use dust mask, gloves, and goggles while cleaning spills
Environmental Precautions: Avoid entry into drains or surface water
Cleanup Methods: Gently sweep up and place material in a suitable container for disposal; dampen with water to minimize dust if necessary
Ventilation: Maintain adequate airflow during spill response
Handling: Prevent formation of dust clouds; avoid breathing dust; use appropriate protective equipment
Storage Conditions: Store in tightly closed containers, in cool, dry, and well-ventilated areas; keep away from strong oxidizers
Incompatible Materials: Oxidizing agents, acids
Hygiene Practices: Wash hands thoroughly after handling; avoid eating or drinking in work areas
Engineering Controls: Local exhaust ventilation recommended in bulk handling
Respiratory Protection: Dust mask for nuisance particulates
Skin Protection: Chemical-resistant gloves
Eye Protection: Safety glasses or chemical splash goggles
Other Protection: Lab coats or aprons to prevent skin exposure
Molecular Formula: C19H16O
Physical State: Solid at room temperature
Melting Point: About 164-165°C
Solubility: Sparingly soluble in water; more soluble in ethanol, ether, and organic solvents
Vapor Pressure: Negligible at room temperature
Density: 1.197 g/cm³
Odor Threshold: Not established
Color: White or nearly white
Chemical Stability: Stable under normal usage and storage conditions
Hazardous Reactions: May react with strong oxidizing agents
Decomposition Products: May produce carbon oxides if subjected to extreme heat
Conditions to Avoid: Open flames, strong acids, and oxidizing environments
Acute Toxicity: Data show low toxicity; relatively high LD50 in animal studies
Routes of Exposure: Inhalation, skin, eyes, ingestion
Chronic Effects: No known long-term health effects at laboratory exposure levels
Irritation: Mild irritant for skin and eyes; inhalation of large amounts of dust may cause respiratory discomfort
Carcinogenicity: Not listed as carcinogenic under current regulatory standards
Ecotoxicity: No significant data showing direct toxicity to aquatic organisms, but best practices minimize release
Persistence and Degradability: Persistent under normal environmental conditions; slow degradation expected
Bioaccumulation: Low likelihood due to limited water solubility
Mobility in Soil: Unlikely to leach or travel far from spill sites
Other Concerns: Routine best practices prevent unnecessary exposure to local environments
Preferred Disposal: Incinerate or dispose of according to federal, state, and local regulations for non-hazardous substances
Container Disposal: Triple rinse and puncture containers to prevent misuse; then follow guidelines for chemical waste
Avoid: Release into drains or public waterways; uncontrolled burning
Proper Shipping Name: Triphenylmethanol
Transport Hazards: Not regulated as dangerous for transportation
Packing Considerations: Use well-sealed containers, prevent movement or breakage during shipping
Labeling: General chemical transport labeling applies, though not listed as hazardous or restricted under routine cargo rules
Spill Response in Transit: Routine chemical clean-up protocol sufficient
International Listings: Registered under general chemical inventories where applicable
Occupational Exposure Limits: No OSHA PELs or ACGIH TLVs specific to triphenylmethanol
Compliance Obligations: General duty for safe handling, storage, and disposal; adherence to environmental and workplace safety regulations
Consumer Use Restrictions: Not intended for direct human or veterinary use outside controlled professional settings
