© 2026 Nanjing Finechem Holdings Co., Ltd,
All Right Reserved
Name: Total Suspended Solids Calibration Standard
Common Description: Laboratory reference material designed to simulate suspended solids concentration in water.
Appearance: Fine, off-white particulate matter dispersed in distilled water.
Primary Use: Used in laboratories for calibrating analytical instruments that measure water samples for suspended solid content.
Potential Health Hazards: Eye and skin irritation can occur on contact due to the fine particle nature. Inhalation of dry powder may irritate the respiratory tract. Swallowing solution is unlikely to cause serious effects but may be uncomfortable.
Hazard Symbols: This material rarely carries an official hazard label, but standard precautions apply.
Physical Hazards: Slippery surfaces are common if spilled, risking falls.
Main Components: Filtered and dried inorganic solids such as kaolin clay, silica, or similar mineral particulates suspended in ultra-pure water.
Purity: Composed predominantly of inert mineral solid constituents, which are not readily soluble.
Additives: Sometimes stabilized with a trace amount of dispersant to maintain homogeneity, but no acute toxins.
Eye Contact: Flush the affected area with plenty of water for at least 15 minutes, rolling the eyeball occasionally to clear any irritation.
Skin Contact: Wash thoroughly with soap and water. Remove contaminated clothing.
Ingestion: Rinse mouth and drink plenty of water if swallowed. Seek medical attention if discomfort persists.
Inhalation: Move to fresh air. Breathe normally. Seek medical advice if respiratory symptoms occur.
Suitable Extinguishing Media: Use carbon dioxide, dry chemical, foam, or water spray. There's minimal fire risk since it contains primarily water and minerals.
Hazardous Combustion Products: If dried and subjected to high temperatures, dust may release minor quantities of inorganic oxides. No toxic fumes detected under standard conditions.
Protective Equipment: Firefighters should don standard protective gear and self-contained breathing apparatus in closed spaces.
Personal Precautions: Wear gloves, safety goggles, and a dust mask if cleaning dry spills. Prevent contact with eyes and prolonged skin exposure.
Environmental Precautions: Avoid discharging concentrated solutions into storm drains or waterways to prevent localized turbidity.
Cleanup Methods: Scoop up with non-sparking tools. Rinse area with water after bulk material has been removed. Collect residue in a suitable container for disposal.
Safe Handling: Avoid creating dust and breathing in particles. Use only in a well-ventilated area. Cap bottles tightly after use.
Storage Conditions: Store at room temperature, away from direct sunlight or sources of heat. Keep containers upright to prevent leaks and contamination.
Engineering Controls: Laboratory ventilation, including exhaust hoods, helps to minimize exposure.
Personal Protection: Safety glasses, disposable gloves for prolonged or repeated contact, and a laboratory coat offer sufficient protection for most handling scenarios. A dust mask may be needed if working with dry form.
Hygiene Measures: Wash hands promptly after handling, before eating or drinking.
Form: Fine mineral solid suspended in water
Color: Off-white or light grey
Odor: Odorless
Solubility: Insoluble solids dispersed in water
pH: Typically neutral to mildly alkaline depending on mineral composition
Stability: Settles over time if left undisturbed
Chemical Stability: Remains stable under typical laboratory conditions. No known dangerous reactions under normal use.
Conditions to Avoid: Extremes of heat or freezing, which might affect sample integrity.
Hazardous Reactions: Negligible reactivity with other laboratory reagents when stored properly.
Acute Effects: Low toxicity expected due to inert, mineral nature. Temporary irritation possible if dust contacts mucous membranes.
Chronic Effects: Repeated contact with dust over long periods can cause mild respiratory irritation, especially for sensitive individuals.
Sensitization: Unlikely, but not impossible with prolonged, repeated exposure in persons with existing allergies.
Environmental Impact: Mineral solids can increase turbidity and may slightly alter sediment in receiving waters but are not toxic to aquatic life at calibration concentrations.
Persistence and Degradability: Inorganic minerals remain in the environment; they do not degrade chemically.
Bioaccumulation: Not expected to bioaccumulate.
Waste Handling: Use best laboratory practices to minimize waste. Dispose of substantial liquid or solid waste as non-hazardous, observing regional and institutional laboratory waste disposal regulations.
Avoid: Pouring large volumes directly down the drain unless permitted by local sewage guidelines.
UN Classification: Not classified as hazardous for transport.
Packing: Use leak-proof containers. Prevent tipping during transport to avoid spills.
Special Precautions: None for routine laboratory quantities. Secure containers during transit.
Regulatory Status: Does not fall under international chemical safety regulations for hazardous goods. Laboratory use remains the intended application.
Worker Protection: Standard laboratory safety rules apply. Training in chemical handling ensures protection, especially in educational and analytical labs.
