© 2026 Nanjing Finechem Holdings Co., Ltd,
All Right Reserved
Name: Fluoromount Aqueous Mounting Medium
Common Use: Mounting biological slides for fluorescence microscopy
Typical Appearance: Clear to slightly hazy liquid
Odor: Low, faint chemical scent detected in open air
Risk: Eye and mild skin irritation reported for exposed users
Physical Hazards: Low flammability due to high water content
Health Effects: Symptoms like redness, irritation, or itching after direct contact with eyes or prolonged skin exposure
Environmental Hazards: Spills do not cause rapid or aggressive harm to surfaces but contribute to lab chemical waste load
Main Components: Aqueous polymer resin, glycerol, proprietary surfactant system
Potential Trace Additives: Low concentrations of stabilizers, preservatives—often unnamed by manufacturers
Notable Exclusions: No volatile aromatic solvents, no hazardous heavy metals, no known carcinogens listed in public sources
Eye Exposure: Rinse under running water for several minutes, blink frequently to help removal of residue
Skin Contact: Wash with soap and water, seek medical help if rash or discomfort continues
Inhalation: Move to fresh air if large spill creates an aerosol, usually not needed for typical use
Ingestion: Rinse mouth, drink water to dilute; monitor for gastrointestinal upset, consult medical advice for large amounts swallowed
Sensitivity: Not prone to ignition due to water base, low risk in normal laboratory environments
Recommended Extinguishing Agents: Water spray, foam, CO2 extinguisher
Hazardous Combustion Products: Possible carbon monoxide and carbon dioxide release if fully combusted in rare fire
Protective Gear for Firefighters: Standard protective gear suffices in most cases; respiratory protection if smoke develops
Personal Precautions: Wear gloves, avoid touching face or eyes while cleaning
Environmental Precautions: Prevent from entering direct water supply, wipe spills with absorbent paper or towels
Cleanup: Use lab wipes or absorbent pads, finish with detergent and water on affected surface; dispose of wipes as chemical waste
Handling Practices: Use in well-ventilated space, wear gloves, avoid unnecessary splashing or eye contact
Storage Recommendations: Keep container tightly closed, store at room temperature away from direct sunlight, protect from freezing
Incompatibilities: Strong oxidizers or acids can cause destabilization or gelling, so keep separated
Control Methods: Use chemical-resistant gloves, safety goggles or face shield if splashing risk exists
Ventilation: General purpose fume hoods suffice, higher ventilation not usually required due to low vapor output
Clothing: Standard lab coat prevents skin contact on arms and torso
Hygiene: Wash hands after use, avoid eating or touching eyes before cleaning up
Physical State: Liquid
Color: Clear or faintly milky
Solubility: Miscible with water
Boiling Point: Similar to water due to aqueous base
Odor Threshold: Very low, only apparent in concentrated form
Evaporation Rate: Slow, less noticeable than pure water
pH Range: Slightly neutral to mildly alkaline
Stability: Stable under typical lab storage conditions without rapid decomposition
Reactivity Concerns: Reacts with potent oxidizing substances, loses function in strong acid or highly alkaline environments
Decomposition Products: Prolonged overheating can release small amounts of carbon oxides, rarely encountered in practice
Acute Effects: Mild irritant effect on eyes and skin for some users
Chronic Exposure: Extended, repeated exposure has not shown significant long-term health impacts in academic literature
Inhalation Risks: Low volatility means vapor exposure is minimal to nonexistent for typical tasks
Carcinogenicity: No known linkage to cancer from available published studies
Environmental Fate: Dilutes in water, slow breakdown, not bioaccumulative
Toxicity Profile: Unlikely to harm aquatic or terrestrial organisms under laboratory waste disposal levels
Persistence: Component chemicals degrade naturally over time, but best practice avoids direct disposal in nature
Preferred Practices: Collect used or contaminated mounting medium in chemical waste containers designated for aqueous waste
Local Regulations: Lab Safety Officers guide users to dispose fluids alongside other water-soluble chemical waste streams
Down-the-Drain Disposal: Avoid, except in very diluted, trace quantities, and only if local authority allows
Transport Classifications: No special labeling or hazard signage required for non-bulk lab transport
Container Security: Ensure lids secure during movement to prevent leaks
Restricted Transport Modes: Unrestricted for most types of ground or air shipment in common packaging
Label Requirements: Standard lab chemical labeling with identification and warnings
Listed Hazards: Not listed as hazardous waste or controlled chemical in major regulatory databases
Occupational Standards: Not subject to special occupational exposure limits under most international regulations
