© 2026 Nanjing Finechem Holdings Co., Ltd,
All Right Reserved
Chemical Name: Fluopicolide
Chemical Family: Pyridine derivatives
Recommended Use: Fungicide applied in agriculture, especially potatoes, grapes, cucumbers, and lettuce
Form: Usually solid or in granular and suspension concentrate forms used for crop protection
Common Trade Names: Available under various proprietary names, each region seeing its own branding
Physical State: Solid or as a suspension, not generally volatile at room temperature
Hazard Classification: Often classified as harmful if swallowed, can cause irritation on contact with skin and eyes
Labeling Symbols: Exclamation mark for acute toxicity, environment symbol for longer-term effects
Major Risks: Eyes and skin face immediate irritation, while ingestion brings risk to internal organs at high doses
Routes of Exposure: Main risks arise over extended contact with skin or accidental swallowing during mixing or application
Main Component: Fluopicolide, typically with purity above 95% in technical material
Chemical Formula: C14H8Cl2F6N2O2
Other Ingredients: Wettable powders and suspensions contain various surfactants and fillers
Impurities: Byproducts of the manufacturing route; not always specified except in technical documentation
Eye Contact: Wash immediately and thoroughly with plenty of clean water for several minutes; seek medical attention if symptoms persist
Skin Contact: Remove contaminated clothing and rinse skin well with water and mild soap
Inhalation: Remove person from area to fresh air; if breathing problems develop, get medical help
Ingestion: Rinse mouth, give water to drink if person is conscious, seek medical advice; do not induce vomiting unless instructed by a medical professional
Flammable Properties: Not highly flammable, but decomposition can release toxic fumes including chlorine and nitrogen oxides
Suitable Extinguishing Agents: Foam, dry chemical, carbon dioxide, or water spray can work well
Firefighter Protection: Firefighters need self-contained breathing equipment and protective clothing, because burning product may release hazardous fumes
Small Spills: Absorb with inert materials such as sand; sweep carefully to avoid raising dust
Large Spills: Prevent spread by creating a barrier, collect spilled product into safe disposal containers
Environmental Release: Do not let product enter drains, surface water, or soil; notify local authorities if contamination occurs
Cleanup: Wear gloves and protective eyewear, ventilate enclosed areas, carefully wash all contacted surfaces after cleanup
Handling: Use outdoors or in ventilated spaces; avoid formation of dust or aerosols
Personal Hygiene: Wash hands thoroughly after handling, especially before eating or drinking
Storage Conditions: Store away from children, animals, feed, and food; keep containers tightly sealed and away from sources of ignition and moisture
Stability: Keep out of direct sunlight and high temperatures to reduce risk of slow degradation
Engineering Controls: Use with local exhaust or outdoors to minimize airborne particles
Personal Protective Equipment: Nitrile gloves, chemical-resistant goggles, long sleeves, mask if necessary
Workplace Exposure Limits: No global occupational exposure limits are set, so always use prudent safety practices when handling
Environmental Controls: Don’t pour waste into drains to limit impact on aquatic life
Appearance: White to light tan powder or suspension
Odor: Generally odorless or faint chemical smell
Melting Point: Approximately 137–139°C
Solubility: Low water solubility, higher in certain organic solvents
Vapor Pressure: Low, not considered a significant inhalation risk except in dust-producing operations
Chemical Stability: Stable under normal storage and use conditions
Materials to Avoid: Strong oxidizers and bases can cause breakdown of the molecule
Hazardous Decomposition: Burning or decomposing releases toxic gases, including hydrogen fluoride, hydrochloric acid, nitrogen oxides
Acute Toxicity: Low acute toxicity in mammals, though ingestion in large quantities can cause gastrointestinal symptoms
Chronic Effects: Testing in rodents has shown some potential for reproductive impact at very high doses
Irritation: Can irritate skin and eyes with direct and prolonged contact
Inhalation Risks: Dust may irritate nose, throat, or lungs especially in confined spaces
Carcinogenicity: No classified as carcinogen by global regulatory bodies based on current animal data
Aquatic Toxicity: Moderately toxic to some freshwater organisms, especially fish and daphnia
Persistence: Breaks down slowly in soil, longer in low sunlight or low temperature environments
Bioaccumulation: Not highly bioaccumulative in large mammals but can persist in soil under certain conditions
Birds and Bees: Not considered highly toxic to avian or bee populations at field rates, but always better to apply with caution
Product Disposal: Best practice is incineration at approved facilities; avoid landfill when possible
Container Disposal: Triple rinse empty packaging, puncture, and send to recycling or hazardous waste sites
Prohibited Actions: Never reuse containers or burn waste on open ground; such actions contaminate soil and water
Proper Shipping Name: Pesticide, Solid, Toxic, Organic, N.O.S. (containing Fluopicolide)
Labels: Mark containers clearly with chemical and hazard symbols
Transport Hazards: Not classed as highly dangerous goods, but mishandling during transport can result in spills with environmental consequences
Special Care: Prevent tipping or breakage, especially in transit through populated or sensitive regions
Registration Status: Approved or restricted depending on national regulations for plant protection products
Occupational Safety: Listed under pesticide control acts in many countries, use is regulated and monitored
Reporting: Spills or environmental releases may trigger notification under chemical safety laws
Label Requirements: Always treat labels on all commercial products as the definitive guide to safe use and compliance
