© 2026 Nanjing Finechem Holdings Co., Ltd,
All Right Reserved
Chemical Name: Cycloterpenol
Common Uses: Laboratory research, specialty chemical synthesis
Appearance: Typically presents as a clear or slightly yellowish liquid
Odor: Strong, somewhat resinous
Chemical Formula: C10H16O
Molecular Weight: 152.23 g/mol
Synonyms: No widely used commercial synonyms
CAS Number: Not always listed under a unique identifier in databases
Main Dangers: Skin or eye irritation, respiratory tract discomfort, flammability
GHS Labels: Flammable Liquid, Irritant, Harmful
Routes of Exposure: Inhalation, skin and eye contact, accidental ingestion
Acute Effects: Redness, stinging, mild burns, cough, dizziness
Chronic Effects: Rare in lab settings, but repeated exposure can add up
Environmental Hazards: May be toxic to aquatic life if spilled
Main Component: Cycloterpenol (pure or typically above 95%)
Impurities: Trace related terpenoid compounds
Additives: Product usually sold unblended for research use
Inhalation: Remove to fresh air, keep calm and upright, monitor for breathing trouble
Skin Contact: Rinse thoroughly with soap and water, remove contaminated clothing
Eye Contact: Flush with gentle stream of water for several minutes, keep lids apart
Ingestion: Rinse mouth, seek medical advice; don’t induce vomiting by yourself
Medical Signs: Irritation, burning, shortness of breath, nausea
Ignition Potential: Medium, vapors can ignite from sparks or open flame
Extinguishing Media: Foam, CO2, dry chemical; water spray for cooling only
Special Hazards: May release irritating or toxic fumes (smoke, carbon compounds)
Firefighter Protection: Self-contained breathing apparatus, full protective suit
Explosion Risk: In tightly enclosed spaces, vapors may build up
Personal Protection: Nitrile gloves, chemical splash goggles, good ventilation or mask
Containment: Stop leaks if risk-free, prevent entry to drains or soil
Cleanup Steps: Absorb with sand or granular material, scoop into secure container
Aftermath: Wash spill area with plenty of water, watch for slippery spots
Disposal: Label all waste, follow chemical regulations for hazardous liquid
Handling: Use with gloves and goggles, avoid open flames, ensure airflow
Hygiene: Wash after handling, don’t eat, drink, or smoke near the work area
Storage Conditions: Keep sealed in cool, dark, dry spot, avoid direct sun and heat
Separation: Store away from oxidizers, acids, strong bases
Ventilation: Fume hood or ventilated cabinet preferred
Engineering Controls: Fume hoods, forced ventilation, chemical-resistant workspace
Personal Protective Equipment (PPE): Chemical splash goggles, laboratory coat, gloves
Respiratory Protection: Air-purifying respirator for high vapor or spill situations
Hygiene Practices: No exposed skin, clean up promptly after use
Physical State: Liquid at typical storage temperature
Color: Colorless to pale yellow
Odor: Distinctive, pungent, terpenoid
Boiling Point: Not widely documented, estimated between 210–230°C
Density: Typically close to 0.93–0.97 g/cm3
Solubility: Low in water, higher in organic solvents like ethanol
Chemical Reactivity: Stable under normal conditions
Instability: Heat, light, or strong acids and bases can trigger decomposition
Hazardous Reactions: Combines energetically with oxidizers; vapors may react in air
Hazardous Decomposition: Smoke, carbon monoxide, carbon dioxide
Container Issues: Pressure buildup if sealed with heat exposure
Acute Toxicity: Skin and eye irritation; inhalation may trigger breathing difficulty at high concentration
Chronic Toxicity: Unlikely without repeated, high-concentration exposure
Sensitization: Rare, but possible with frequent contact
Symptoms: Burning, redness, headache, dizziness, nausea
Carcinogenicity: No data links it to cancer in limited studies
Mutagenicity: No evidence in current published research
Aquatic Toxicity: Some risk for aquatic species if volumes reach waterways
Bioaccumulation: Expected to be low based on molecular structure
Degradability: Likely to break down in the environment, but not instantly
Wildlife Impact: Prevent spills or leaks, always use secondary containment in labs
Product Disposal: Incineration in chemical waste facility preferred over landfill
Container Disposal: Triple rinse, puncture and label before recycling or using disposal service
Avoid: Pouring down drains or regular trash to keep waterways safe
Waste Tracking: Log all chemical disposals with date and quantity
UN Number: None usually assigned without extensive commercial data
Transport Hazard Classes: Flammable liquid if in large volume or in bulk
Packing Precautions: Use tightly sealed containers, upright, marked as hazardous where needed
Vehicle Type: Prefer chemical transport carriers with spill kits and secure holding
National Inventory: Not likely listed in major chemical inventories as a bulk commodity
Workplace Safety: Standard chemical lab safety requirements apply under OSHA
Labeling: Use GHS labeling for flammability, irritant risks, advice on PPE
Restrictions: No consumer use; strictly for lab or controlled industrial applications
