© 2026 Nanjing Finechem Holdings Co., Ltd,
All Right Reserved
Product Name: Arquad 2HT-75
Chemical Family: Alkyl Quaternary Ammonium Compounds
Synonyms: Ditallow dimethyl ammonium chloride solution
Used in textile softening, industrial water treatment, and as a raw material in various formulations, this chemical often shows up in routine cleaning products on factory floors and laundry rooms. It stands out for its role in reducing surface tension and helping blend oil and water-based mixtures, making it a go-to ingredient for many industrial businesses seeking efficiency in their operational chemistry.
Health Hazards: Skin and eye irritation are common on direct contact. Inhalation may irritate respiratory passages.
Fire Hazards: Flammable vapors can form at elevated temperatures.
Environmental Hazards: Toxic to aquatic organisms, with long-term negative impacts if released into waterways.
Years on the maintenance crew taught me quickly that ignoring safety signage around these chemicals invites burns, stinging eyes, and plenty of trouble. You might think your skin's pretty tough, but it only takes a careless spill to set you straight.
Main Ingredient: Alkyl (C16-C18) dimethyl benzyl ammonium chloride ~75%
Other Components: Water, isopropanol
Note: The bulk of Arquad 2HT-75 owes its properties to long hydrocarbon chains and quaternary ammonium backbone, which give it a sharp edge both chemically and physically in most uses.
Skin Contact: Wash immediately with soap and plenty of water.
Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses.
Inhalation: Move to fresh air. Seek medical attention if symptoms show up.
Ingestion: Rinse mouth. Do not induce vomiting. Seek medical attention.
In the factory, a quick dash to the eyewash station spells the difference between a rough shift and a medical bill. Folks new to handling this stuff often notice mild redness or itchy skin, which ramps up with longer exposure. Workers who skip gloves sometimes pay a price.
Suitable Extinguishing Media: Use alcohol-resistant foam, dry powder, carbon dioxide. Water spray works too, but can spread contaminants.
Hazards from Combustion: Fumes may contain nitrogen oxides, carbon oxides, and hydrogen chloride.
Special Protective Equipment: Firefighters should use self-contained breathing apparatus.
In fire drills, the first time you catch the scent of burning chemicals like this is unforgettable—sour, harsh, laced with the knowledge that basic water won't always cut it. In closed spaces, those fumes hang tight and require fast action with foam or CO2 units.
Personal Protection: Put on gloves, safety goggles, and boots before clean-up.
Spill Containment: Prevent entry to drains. Dike area with sand or inert material.
Clean-Up Methods: Soak up with absorbent material, shovel into suitable containers.
A long shift spent cleaning up leaks leaves an impression—never cut corners on gloves, and wash down hard surfaces twice to strip away that slick residue. Spills that reach drains spark panic, because priority always shifts to stopping environmental runoff.
Safe Handling: Use in well-ventilated area. Always avoid splashing or generating mist. Store chemicals away from food and feed products.
Storage Conditions: Keep containers tightly closed. Place away from heat, sparks, and open flames. Avoid freezing.
Routine in facilities dictates a clear divide between storage for raw chemicals and any production line involving Arquad 2HT-75. One forgetful placement near a heat vent and sealed drums start to bulge. Untrained hands often overlook the risk until they hear a hiss or spot drum corrosion.
Engineering Controls: Local exhaust ventilation handles airborne vapor or mist.
Personal Protective Equipment: Gloves (nitrile or rubber), safety glasses, face shield, long sleeves, chemical boots.
Over time, good habits become second nature. Wiping sweat off your forehead with a gloved hand sometimes leads to red rashes, showing just how stubborn these compounds cling. Proper gear means quicker cleanup, fewer sick days, and a healthier team.
Form: Thick liquid
Color: Pale yellow to amber
Odor: Faint ammonia-like
Melting Point: Below 0°C
Boiling Point: 95-105°C
Flash Point: 39°C
Solubility: Miscible with water
During my time mixing batches on the floor, the sticky, clinging feel and sharp scent meant it got on your hands even before you clocked in. The way it slicks over floors makes spills more dangerous, especially for new folks not used to the warning signs.
Chemical Stability: Stable under normal conditions.
Incompatible Materials: Strong oxidizers, strong acids, anionic surfactants.
Decomposition Products: Toxic fumes under fire conditions.
Lab spills demonstrate that mixing with the wrong drain cleaner or bleach doesn’t just waste stock—sometimes it makes an awful stink and brings on headaches. Cross-contamination in shared containers prompts quick identification and clean-up, because nobody wants a chemical surprise bubbling up.
Acute Effects: Eye and skin irritation, swallowing causes digestive irritation, cough or shortness of breath if inhaled.
Chronic Effects: Prolonged, repeated exposure triggers eczema, dermatitis, sometimes airway sensitization.
Routes of Exposure: Skin, eye, inhalation, mouth.
Watching coworkers drop out of shifts with raw hands pushed management to double down on PPE and shorter exposure windows. Symptoms fade if you catch them early, but they linger if the right steps aren’t taken soon enough.
Aquatic Toxicity: Harmful to fish and aquatic life, disrupts beneficial bacteria in water treatment plants.
Persistence: The compound breaks down slowly and tends to stick around in sediment.
Discharge into drains causes alarms because surfactants don’t just vanish—waterways take the brunt. Fish kills and clogged treatment filters tally up the impact if disposal steps go ignored. The drag on local wildlife and tight regulatory reins show how closely these issues tie into community well-being.
Waste Disposal: Dispose in accordance with local, state, and national regulations. Never pour into surface water.
Container Disposal: Triple-rinse and puncture, then deliver to hazardous waste handler.
Tossing out leftover drums is never a casual sweep to the dumpster. Regulations hang over the process, with environmental compliance officials making routine stops. Keeping contaminated water out of the storm sewers means thinking through every rinse cycle and ensuring the right paperwork is filed.
UN Number: 2920 (Corrosive liquid, flammable, n.o.s.)
Class: 8 (Corrosive); subsidiary risk: 3 (Flammable liquid)
Packaging Group: II
Labels and paperwork stack up at loading docks. Logistics teams learn exactly which placards go on each container, and delays happen until every label lines up. This isn’t a box of soap heading down the road—it’s a regulated compound watched closely by both environmental and transport authorities.
Regulations: Listed under many environmental protection and chemical safety acts (such as the US EPA’s TSCA). Registered for use only in certain applications and concentrations.
Restrictions: Environmental discharge limits and workplace exposure controls often apply.
Policy meetings grow tense when compliance slips, because hefty fines and shutdowns follow a paper trail. The regulatory landscape for chemicals like Arquad 2HT-75 draws clear boundaries, reflecting lessons learned after past spills and environmental harms, all engraved into the daily grip of industry.
