© 2026 Nanjing Finechem Holdings Co., Ltd,
All Right Reserved
Chemical Name: Acetaminophen Related Compound C
Molecular Formula: Varies by source, related to the acetaminophen backbone
SYNONYMS: Often referenced in analytical procedures for acetaminophen impurity profiling
Appearance: Typically found as a crystalline powder, color may range from off-white to light beige
Primary Use: Pharmaceutical intermediate, mainly as an impurity marker in drug quality control labs; not intended for general consumer use
Routes of Exposure: Inhalation, skin contact, ingestion during laboratory handling
Odor: Mild, not distinct enough to serve as a reliable warning property
Acute Hazards: Inhalation may irritate respiratory tract; skin or eye contact can cause local irritation; ingestion presents risks unknown without comprehensive toxicology data
Chronic Hazards: Persistent exposure risk not fully documented; similar compounds sometimes raise concern over kidney or liver function
Precautionary Categories: Laboratory chemical, not for unsupervised handling
Signal Word: Caution
Other Concerns: Some related acetaminophen degradation products have mutagenicity red flags, so handle with extra care in case of undetected breakdown
Chemical Identity: Chemically defined impurity in the context of acetaminophen stability studies
Concentration Range: Found in trace amounts during finished drug analysis; handled as a pure material in research labs
Impurity Profile: Typically a single chemical entity, not a mixture; analytical standards must match the defined isomer or analog of Compound C
Inhalation: Move impacted person into fresh air; seek medical advice if any discomfort persists
Skin Contact: Wash thoroughly with soap and running water; remove and wash contaminated clothing before reuse
Eye Contact: Rinse with water for several minutes, use both hands to keep eyelids open; visit a medical professional if irritation lingers
Ingestion: Rinse mouth, do not induce vomiting unless directed; prompt medical attention required because toxicology data is incomplete
Extinguishing Media: Use water spray, CO2, alcohol-resistant foam, or dry chemical as appropriate for surrounding fire
Combustion Products: Under fire, decomposition can liberate irritating or toxic gases including carbon oxides and nitrogen oxides
Personal Protection: Standard fire-fighting self-contained breathing apparatus, chemical-resistant gear
Fire Hazards: Not especially flammable but powders can present dust hazard given the right conditions; heat can break down molecular structure
Personal Precautions: Use chemical gloves, laboratory coat, and goggles; avoid breathing dust or contact with skin
Spill Management: Collect with dampened disposable towel or HEPA-filter vacuum; keep dust at a minimum; thoroughly clean the contaminated area
Environmental Precautions: Prevent spill runoff from reaching drains or waterways
Handling Recommendations: Use in a chemical fume hood; minimize dust generation; do not eat, drink, or smoke nearby; practice laboratory hygiene
Storage Conditions: Keep in tightly closed container, protected from light and moisture; store at room temperature unless research specifies colder conditions
Keep Segregation: Isolate from incompatible materials and strong acids or oxidizing agents
Engineering Controls: Fume hoods and local exhaust ventilation where powder handling occurs
RESPIRATORY Protection: N95 or higher filtration protective mask if dust risk evident
SKIN Protection: Laboratory nitrile gloves and protective lab coat required at all times
EYE Protection: Tight-fitting chemical safety goggles
Hygiene Measures: Wash hands after handling, shampoo face and arms if exposed to dust
Physical State: Solid powder, usually crystalline
Color: White to light beige
Odor: No strong odor evident
Melting Range: Variable, related to compound structure
Solubility: Limited solubility in water, more soluble in organic solvents
Boiling Point: Not established, decomposes before boiling
Vapor Pressure: Low, not volatile under room conditions
Stability: Typically stable at room temperature in dry, sealed containers
Incompatibilities: Strong oxidizers, acids, certain metals under corrosive conditions
Decomposition Products: Heating may generate hazardous compounds, including nitrogen oxides or toxic organic fragments
Polymerization: Not known to polymerize
Acute Effects: May cause irritation to respiratory tract, skin, eyes; ingestion effect not fully defined due to lack of extensive human toxicity studies
Chronic Exposure: Repeated, prolonged contact or inhalation may present similar risks as known acetaminophen impurities such as hepatic or nephritic impact; animal studies for related compounds sometimes show organ changes
Sensitization: Unlikely from brief contact, but no definitive studies
Carcinogenicity: Not listed by NTP, IARC, or OSHA; parent molecule considered safe within therapeutic use, impurities rarely present at high enough levels for risk assessment
Mutagenicity: Related impurity classes possess some DNA-damaging potential in vitro, driving strict control in pharmaceutical synthesis
Aquatic Toxicity: Not fully evaluated, but trace pharmaceutical impurities sometimes harm aquatic microorganisms at higher concentrations
Persistence: Stable under environmental conditions, slow degradation likely
Bioaccumulation: Unlikely at trace levels typical for accidental release; not expected to concentrate in higher organisms
Soil and Water Mobility: Limited solubility leads to restricted mobility in natural settings
Safe Disposal: Collect unused material and contaminated disposables for disposal via licensed hazardous waste contractor
Drains and Landfill: Do not discharge any quantity to sewer or environment; avoid landfill as regular solid waste due to persistence
Container Disposal: Deface labels before discarding containers; rinse triple with compatible solvent before following hazardous waste protocols
Local Regulations: Follow lab, institutional, and municipal hazardous waste rules
UN Number: Not classified as dangerous under most international transport regulations at laboratory quantities
Proper Shipping Name: Not regulated for road, air, or sea at research scale
Packaging: Leak-proof, sealed primary container with cushioning secondary containment for breakage protection
Special Precautions: Notify receiving labs of any physical damages or leaks noted during transit
Chemical Inventory: May not appear on general chemical control lists, as it’s often classified with acetaminophen-related research chemicals
OSHA Status: No specific exposure limit, but general chemical handling rules apply for research laboratories
Drug Regulatory Agencies: Considered a controlled impurity; strict limits apply in finished pharmaceutical products; handled only by qualified personnel
Waste Codes: Adheres to hazardous waste categorization if disposed in volume; trace disposal under small-scale lab exceptions requires review of regulations
Labelling: Clear identification as chemical research material required at all stages
