© 2026 Nanjing Finechem Holdings Co., Ltd,
All Right Reserved
Chemical Identity: 12-Hydroxyoctadecanoic Acid Polymer
Common Names: Hydroxystearic acid polymer, ricinoleic acid polymer
Appearance: White to off-white solid, typically in granular or pellet form
Odor: Slight, fatty or waxy scent
Solubility: Insoluble in water, often swells in nonpolar organic solvents
Primary Hazards: Dust generated during handling can irritate eyes and upper respiratory tract
Acute Health Risks: May cause mild skin or eye irritation upon direct contact
Chronic Health Risks: Long-term exposure to dust may aggravate asthma or respiratory conditions
Fire Risk: Can support combustion if heated strongly; dust may form explosive mixtures with air
Environmental Impact: Low acute toxicity to aquatic life, but persistent in soil and water due to low biodegradability
Main Component: Poly(12-hydroxyoctadecanoic acid)
Impurities: Small quantities of unreacted 12-hydroxyoctadecanoic acid, traces of catalyst residues
Additives: Minor stabilizers or antioxidants sometimes present; usually disclosed in supplier documentation
Inhalation: Move to fresh air; seek medical attention if respiratory symptoms persist
Skin Contact: Wash with soap and water; take off contaminated clothing
Eye Contact: Rinse with water for several minutes; seek medical advice for persistent discomfort
Ingestion: Rinse mouth, drink water to dilute, and consult a medical professional if symptoms occur
Suitable Extinguishing Media: Use water spray, dry powder, foam, or carbon dioxide
Hazardous Combustion Products: Carbon oxides, acrolein, possible other organic fumes
Special Protective Equipment: Full protective gear and self-contained breathing apparatus for large fires
Firefighting Concerns: Polymer dust and vapors can ignite, so ventilation and careful handling are crucial
Personal Precautions: Ventilate area, avoid dust formation, wear dust-resistant mask and goggles
Environmental Precautions: Prevent entry into waterways, collect residues before disposal
Cleanup Methods: Sweep up material without generating dust, place into approved containers
Storage Conditions: Store in cool, dry, well-ventilated place away from heat sources
Handling Practices: Use local exhaust ventilation, minimize generation of dust, avoid unnecessary skin contact
Incompatibilities: Strong oxidizers, strong acids can cause exothermic reactions
Engineering Controls: Local exhaust and dust collection systems recommended in processing areas
Personal Protective Equipment: Safety goggles, gloves, long-sleeved protective clothing
Respiratory Protection: NIOSH-approved dust mask in high-dust settings
Exposure Limits: No established limits for this specific polymer, but total nuisance dust limits apply
Physical State: Solid, waxy or friable pellets
Color: White to pale yellow
Melting Point: 80–100°C, varies with polymer chain length
Odor Threshold: Not established, generally low-odor
Density: 0.9 – 1.1 g/cm³
Water Solubility: Negligible
Vapor Pressure: Not volatile under ambient conditions
Partition Coefficient: High logP, strongly hydrophobic
Stability: Stable under recommended conditions
Hazardous Reactions: Polymers can depolymerize or degrade if exposed to strong acids, bases, or heat
Decomposition Products: Carbon dioxide, carbon monoxide, heavier organic vapors
Polymerization: Further polymerization unlikely under normal handling
Routes of Exposure: Inhalation, skin, or eye contact; ingestion is rare
Acute Effects: Mild skin or eye irritation, respiratory discomfort from dust
Carcinogenicity: Not classified as a known carcinogen by IARC, NTP, or OSHA
Chronic Effects: No evidence of chronic toxicity under proper industrial hygiene practices
Sensitization: Occasional reports of allergic skin reactions, though considered low risk
Aquatic Toxicity: Limited acute toxicity to aquatic organisms
Biodegradability: Hydroxyoctadecanoic acid backbone resists microbial breakdown; persistence expected
Bioaccumulation: Lipophilic character may promote low-level bioaccumulation in aquatic species
Soil Mobility: Low solubility restricts movement through soil and groundwater
Waste Treatment: Can be disposed of in accordance with local industrial waste regulations
Recycling: Some post-industrial recyclability reported among end-users
Incineration: Controlled incineration preferred to limit release of toxic combustion byproducts
Landfilling: Permitted, though not considered the most sustainable option due to polymer persistence
Shipping Classification: Typically not regulated as hazardous for transport
Handling During Transit: Safeguard against packaging breakage and minimize exposure to moisture or heat
Transport Hazards: Slippery if spilled; static discharge possible with airborne dust
Global Inventory Status: Often listed in the chemical inventories of industrialized nations
Occupational Safety: Occupational exposure limits governed by general dust standards rather than polymer-specific regulations
Environmental Reporting: Subject to reporting under local pollution control and waste management laws
Other Provisions: Polymers with high molecular weight face fewer regulatory obstacles compared to small-molecule monomers
